Shadow foam cases.

This case is 1 of 2 cases that the customer requested, for this one they REALLY wanted pink foam in both the bottom and the top however Shadow Foam have sadly discontinued their pink foam, I’m not sure why currently.

The customer in this instance actually had the lower half already as they had originally planned to do it themselves, but instead opted to have me do it instead, unfortunately they didn’t have the lid. So purple was our only choice that wouldn’t clash too dramatically.

This was possibly the quickest case I’ve done yet, the logo took a measly 15 minutes to complete, the rest of the time was spent measuring and arranging the layout with the customer. The worst part about this job though is that the spray adhesive I use decided that the nozzle wasn’t going to work correctly and got stuck, I was able to get the adhesive into the case and on the back of the foam but it didn’t stop after that, so now there’s a can down the side of my workshop likely stuck to the wall. . . I should go check on that. . . I also recorded a short timelapse of cutting out the lid which you can see below (coming soon).

Number of Objects : 9 Time Taken: ~2 hours Estimated Cost: £98 (Customer supplied the case and the bottom foam).

Ok so this case was for the same guy who wanted the GHM-9 SD case.

With both cases the MP9 style stick mags really lend themselves well to being in a line and a finger channel cut out, the downside to this though is that the retention is reliant on all the mags being present or the walls of the slots will want to bend away from the mags.

You can also see due to the stock height when folded it dents the lid, it is what it is and the customer seems to be happy with it.

Oh, my logo? That was their idea after I mentioned putting my logo in is free! It feels just a little too self aggrandising to charge someone to have my logo in their shit.

Number of Objects: 8 Time Taken: ~2 hours Estimated Cost: £146